Aquafighter Snake Fuel Tank Water Absorber

Suspended water is that which is bound to the fuel molecules making it appear cloudy, as opposed to free water that presents itself as a separate layer to the fuel at the bottom of the tank. Under pressure changes and agitation, often experienced as the fuel passes through pumps and filters, water can become fully emulsified in fuel which sees it turning from cloudy to milky. This is where there is almost no separation between the fuel molecules and water content.

Aquafighter is fuel tank water absorber that removes both free, suspended and emulsified water in the fuel providing a complete solution to water contamination. Aquafighter ensures that your fuel tank is water-free all the time by absorbing the free water and separating and capturing suspended water that makes the fuel looks cloudy. On the other hand, other diesel and oil tank water absorbers on the market can remove only free water, solving half of the problem.

Aquafighter fuel tank water absorbers can remove free and bound water level down to 70ppm (exceeding refinery spec). However, if you have a problem with seriously contaminated fuel with a large quantity of particles, dirt and bacteria, then Aquafighter fuel tank water absorber cannot improve the quality of considerably spoilt diesel fuel. In the event of considerably dirty fuel, we recommend considering professionally cleaning your fuel and tank and then start using Aquafighter to prevent problems with water contamination in the future.

Aquafighter fuel tank water absorber is designed to keep your fuel water-free, preventing water contamination and diesel bug growth. Additives usually only treat the symptoms caused by water present in the fuel without solving the actual problem. Also, the diesel tank water absorber does not simply “absorb” water, but separates and captures it, which can save you money and time in repairing damaged equipment.

Unfortunately, there is no straight answer to this question as Aquafighter water absorber can be influenced by factors such as how bad the fuel is contaminated, high humidity, leaks that require you to replace the tank water absorber more often. You can however retrieve Aquafighter at any time to check whether it appears full.

No. The Aquafighter fabric membrane is designed to resist expansion even when full. This is designed so that there is zero risk of removing it from the tank when it is full.

The efficiency of the fuel tank water absorber has been tested over 7000 times by two of the largest fuel producers in the world and at the renown Saybolt Laboratories in Sweden. In every test sample, the results show that Aquafighter water absorber removes bound water to less than 70ppm. This and many more satisfied customers prove the Aquafighter is a perfect solution for water contamination in fuel.

Don't just take our word, learn more about how Aquafighter diesel tank water absorber can help you keep your fuel tank water-free, click here to read the product guide.

The model of Aquafighter water absorber best suited to your requirements depends on two things; the size of your tank opening that the Aquafighter will be lowered into, and the capacity of the tank. Once you have this information, view our product selection table.

The Aquafighter Finger is small enough to be added directly into the fill point of a piece of agricultural or plant machinery. You can leave it to absorb the water content in the fuel whilst the engine is not running, and remove it when it is. This makes it ideal for ensuring fuel is kept water-free when equipment is not in use.

The Aquafighter fuel tank water absorber is designed to be lowered directly to the bottom of the fuel tank, and that the cord is secured outside of the tank for easy retrieval for inspection and replacement. For full instructions click here.